Nitroflon
Product Characters
When metal with high speed friction to metal, noise will be happened and wearing rapidly, Nitroflon product with character of no applying lubricant required,the super lubricating result will be reached, it is guarantee that completely oiless (no more trouble of oil dirt to pollute surface of finished product).
Nitroflon with super high hardness alloy film, much lower noise, excellent sliding ability, excellent wearing-resistant, especially it is very good performance under heavy gravity,hardness is up to HV950 (HRC70.4), it is applicable for mirror surface, wire PIN, wearing consumable material, etc. related components, in order to match best functional surface treating technology.
Nitroflon is not only with high hardness non-oil lubricating performance, but also to enhance metal with super result of corrode-resistant under protection of special alloy film,it is capable of adding huge character on material to against corrosion, to resist acid & alkaline.
Special material of Nitroflon is suitable for any metal processing (copper, iron, steel, aluminum, etc..), method of material processing is also available for satin surface, shining surface, mirror surface, sand blasting, engraving, hair line, etc...
Applicable Range
It is able to coat on processing surface of various metal products, for example iron, steel, copper, aluminum, stainless steel, casting iron, powder metallurgy, etc…
Advantage
1
|
Even thickness of electroplating film and able to plate inside the hole without grinding process. |
2
|
Plating layer with strong adhesion, high hardness, good corrode-resistant. |
3
|
No oil apply required, no lubricant required. |
4
|
Super lubricating performance, excellent sliding ability. |
5
|
Alloy film with much lower noise |
6
|
High hardness, wearing resistance is good. |
7
|
Excellent corrode resistance. |
|
Benefit
1
|
Hugely to reduce wearing |
2
|
Extend the operation life. |
3
|
Hugely to reduce cost. |
4
|
Reduces percentage of defective product. |
5
|
With idea of environment friendly. |
|
Physical Character Comparison Sheet for Titaflon,Nitroflon and Hardened Chrome Coating
|
Nitroflon
(metal to metal)
|
Titaflon
(metal to plastic)
|
Chemical Nickel
|
Hardened Chrome
|
Hardness
|
HV 1030~1060 |
HV 550 |
HV 450~500 |
HV 950~1000 |
Thermal-Resistance
|
500-700 ℃ |
300-350 ℃ |
400 ℃ |
400 ℃ |
Sliding Ability
|
super excellent |
excellent |
good |
poor |
Flow Ability
|
excellent |
super excellent |
no maker to apply it |
common |
Separation Ability
|
excellent |
super excellent |
no maker to apply it |
common |
Dynamic Friction Coefficient
|
0.045 |
0.058 |
0.114 |
0.118 |
Mold Release Ability
|
no mold release agent required |
no mold release agent required |
mold release agent not applied is possible |
must apply mold release agent |
Corrode Resistance
|
PH 1~12 |
PH 1~12 |
PH 1~12 |
not workable |
Equivalent Ability
|
±10 |
±10 |
±10 |
thickness is not same |
Plating Surface
|
no micro hole |
no micro hole |
no micro hole |
cracking trend, more micro holes |
Surface Roughness
|
0.02 |
0.27 |
0.12 |
0.44 |
|
Strong hardness |
good mold release ability |
|
|
